Image 1 of 1
STRAIGHT COOL SYSTEMS
Standard Features:
High efficiency Energy-efficient compressor
High-density foam compressor Advanced Copeland Technology
Fully charged for 15' of tubing length
Copper tube/ enhanced aluminum fin coil-5mm diameter
Factory-installed filter drier
Sweat connection service valves with easy access to gauge ports
Enclosed contactor
High-pressure switch
Ground lug connection
Capacitors with extended life
AHRI Certified
ETL Listed
Cabinet Features:
Removable grille-style top design compliant with UL 60335-2-40
Venturi for increased velocity of airflow
Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
Steel louver coil guard
Wire fan discharge grille
Top and side maintenance access
Single-panel access to controls with space provided for field-installed accessories
When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
The Goodman AWST Air Handler (front-return) is designed to be vertically wall or stud mounted. This unit features a check flowrater and direct drive, multi-speed motor. The AWST is housed in a fully insulated, galvanized-steel cabinet.
Standard Features:
AWST Models: Equipped with a fully adjustable TXV
Designed for use with R-32 Refrigerant
Direct-drive, multi-speed motors allows air volume variation for heating/cooling
Sequence-controlled, rust-resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
Aluminum tubing coils on all models
Factory-installed pull-type disconnect
Factory installed R-32 sensor designed for the lifespan of the coil.
Thermoplastic drain pan with bottom primary and secondary drain connections
Built-in filter rack (filter included)
Large chassis (2.5- and 3-ton units) front return only
Small chassis (1.5- and 2-ton units) front or bottom return
Wall-hanging bracket provided
AHRI Certified; ETL Listed
OVERVIEW
The Goodman GLZ condenser is a standard efficiency, low-cost solution f. Just like all of Goodman's equipment, the GLZ is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the Goodman condenser efficiently transfers heat between the outdoor coil, providing cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
QUICK FACTS
Ideal size to cover a smaller house in ideal climates
2 ton, 14.3 SEER2 heat pump condenser
R32: Complies with Clean Air Act New Refrigerant Requirements
Low sound output
Fully charged for up to 15' of line set
Factory-installed bi-flow filter drier
2 Ton
The Goodman GLZ has a capacity of 2 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the GLZ heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The GLZ condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The Goodman GLZ condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The Goodman GLZS has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Disclaimer: This condenser contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R-32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-354-2738 if you have any questions.
2 Ton Multi-Positional Goodman Air Handler - R32
OVERVIEW
The Goodman AMS air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, Goodman upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
QUICK FACTS
2 ton air handler
Electric heat compatible
Optimized for use with R-32 refrigerant
Multi-speed, direct drive ECM blower motor
Multi-positional (upflow, downflow, or horizontal)
2 Tons
The Goodman AMS air handler is rated for an output of 2 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AMS comes with Goodman's standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the Goodman AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The Goodman AMS utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AMS air handler lives up to Goodman's comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.
The Goodman GLZ Heat Pump System is a reliable and cost-effective comfort solution designed to provide efficient heating and cooling for residential applications. Built with durable components and modern technology, this system delivers consistent performance, energy savings, and year-round comfort.
The outdoor GLZ condenser utilizes R-32 refrigerant, meeting current environmental standards while ensuring efficient heat transfer and dependable operation. With a 14.3 SEER2 rating, it offers a balance between affordability and energy efficiency, making it an excellent option for homeowners looking for a practical upgrade from older systems.
Paired with the Goodman AMS air handler, this system features a multi-speed ECM blower motor that enhances airflow control, improves indoor comfort, and reduces energy consumption. Its multi-positional design allows for flexible installation in a variety of configurations, adapting easily to different home layouts.
Engineered for durability, the system includes corrosion-resistant materials, factory-installed components for easier installation, and a 10-year parts warranty (with registration), ensuring long-term reliability and peace of mind.
Overall, the Goodman GLZ system is an ideal solution for homeowners seeking a dependable, budget-friendly HVAC system that meets modern standards without compromising comfort or performance.
MADE IN USA
10YR WARRANTY
The Goodman GLZ Heat Pump System is a reliable and cost-effective comfort solution designed to provide efficient heating and cooling for residential applications. Built with durable components and modern technology, this system delivers consistent performance, energy savings, and year-round comfort.
The outdoor GLZ condenser utilizes R-32 refrigerant, meeting current environmental standards while ensuring efficient heat transfer and dependable operation. With a 14.3 SEER2 rating, it offers a balance between affordability and energy efficiency, making it an excellent option for homeowners looking for a practical upgrade from older systems.
Paired with the Goodman AMS air handler, this system features a multi-speed ECM blower motor that enhances airflow control, improves indoor comfort, and reduces energy consumption. Its multi-positional design allows for flexible installation in a variety of configurations, adapting easily to different home layouts.
Engineered for durability, the system includes corrosion-resistant materials, factory-installed components for easier installation, and a 10-year parts warranty (with registration), ensuring long-term reliability and peace of mind.
Overall, the Goodman GLZ system is an ideal solution for homeowners seeking a dependable, budget-friendly HVAC system that meets modern standards without compromising comfort or performance.
OVERVIEW
The Goodman GLZ condenser is a standard efficiency, low-cost solution f. Just like all of Goodman's equipment, the GLZ is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the Goodman condenser efficiently transfers heat between the outdoor coil, providing cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
QUICK FACTS
Ideal size to cover a smaller house in ideal climates
2,5 ton, 14.3 SEER2 heat pump condenser
R32: Complies with Clean Air Act New Refrigerant Requirements
Low sound output
Fully charged for up to 15' of line set
Factory-installed bi-flow filter drier
2.5 Ton
The Goodman GLZ has a capacity of 2.5 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the GLZ heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The GLZ condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The Goodman GLZ condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The Goodman GLZS has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Disclaimer: This condenser contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R-32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty.
2.5 Ton Multi-Positional Goodman Air Handler - R32
OVERVIEW
The Goodman AMS air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, Goodman upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
QUICK FACTS
2.5 ton air handler
Electric heat compatible
Optimized for use with R-32 refrigerant
Multi-speed, direct drive ECM blower motor
Multi-positional (upflow, downflow, or horizontal)
2.5 Tons
The Goodman AMS air handler is rated for an output of 2.5 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AMS comes with Goodman's standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the Goodman AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The Goodman AMS utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AMS air handler lives up to Goodman's comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.
OVERVIEW
The Goodman GLZ condenser is a standard efficiency, low-cost solution f. Just like all of Goodman's equipment, the GLZ is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the Goodman condenser efficiently transfers heat between the outdoor coil, providing cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
QUICK FACTS
Ideal size to cover a smaller house in ideal climates
2,5 ton, 14.3 SEER2 heat pump condenser
R32: Complies with Clean Air Act New Refrigerant Requirements
Low sound output
Fully charged for up to 15' of line set
Factory-installed bi-flow filter drier
2.5 Ton
The Goodman GLZ has a capacity of 2.5 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the GLZ heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The GLZ condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The Goodman GLZ condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The Goodman GLZS has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Disclaimer: This condenser contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R-32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty.
2.5 Ton Multi-Positional Goodman Air Handler - R32
OVERVIEW
The Goodman AMS air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, Goodman upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
QUICK FACTS
2.5 ton air handler
Electric heat compatible
Optimized for use with R-32 refrigerant
Multi-speed, direct drive ECM blower motor
Multi-positional (upflow, downflow, or horizontal)
2.5 Tons
The Goodman AMS air handler is rated for an output of 2.5 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AMS comes with Goodman's standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the Goodman AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The Goodman AMS utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AMS air handler lives up to Goodman's comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.
HEAT PUMP SYSTEMS
Standard Features:
High efficiency Energy-efficient compressor
High-density foam compressor Advanced Copeland Technology
Fully charged for 15' of tubing length
Copper tube/ enhanced aluminum fin coil-5mm diameter
Factory-installed filter drier
Sweat connection service valves with easy access to gauge ports
Enclosed contactor
High-pressure switch
Ground lug connection
Capacitors with extended life
AHRI Certified
ETL Listed
Cabinet Features:
Removable grille-style top design compliant with UL 60335-2-40
Venturi for increased velocity of airflow
Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
Steel louver coil guard
Wire fan discharge grille
Top and side maintenance access
Single-panel access to controls with space provided for field-installed accessories
When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
The Goodman AWST Air Handler (front-return) is designed to be vertically wall or stud mounted. This unit features a check flowrater and direct drive, multi-speed motor. The AWST is housed in a fully insulated, galvanized-steel cabinet.
Standard Features:
AWST Models: Equipped with a fully adjustable TXV
Designed for use with R-32 Refrigerant
Direct-drive, multi-speed motors allows air volume variation for heating/cooling
Sequence-controlled, rust-resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
Aluminum tubing coils on all models
Factory-installed pull-type disconnect
Factory installed R-32 sensor designed for the lifespan of the coil.
Thermoplastic drain pan with bottom primary and secondary drain connections
Built-in filter rack (filter included)
Large chassis (2.5- and 3-ton units) front return only
Small chassis (1.5- and 2-ton units) front or bottom return
Wall-hanging bracket provided
AHRI Certified; ETL Listed
OVERVIEW
The Goodman GLZ condenser is a standard efficiency, low-cost solution f. Just like all of Goodman's equipment, the GLZ is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the Goodman condenser efficiently transfers heat between the outdoor coil, providing cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
QUICK FACTS
Ideal size to cover a smaller house in ideal climates
2 ton, 14.3 SEER2 heat pump condenser
R32: Complies with Clean Air Act New Refrigerant Requirements
Low sound output
Fully charged for up to 15' of line set
Factory-installed bi-flow filter drier
2 Ton
The Goodman GLZ has a capacity of 2 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the GLZ heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The GLZ condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The Goodman GLZ condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The Goodman GLZS has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Disclaimer: This condenser contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R-32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-354-2738 if you have any questions.
2 Ton Multi-Positional Goodman Air Handler - R32
OVERVIEW
The Goodman AMS air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, Goodman upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
QUICK FACTS
2 ton air handler
Electric heat compatible
Optimized for use with R-32 refrigerant
Multi-speed, direct drive ECM blower motor
Multi-positional (upflow, downflow, or horizontal)
2 Tons
The Goodman AMS air handler is rated for an output of 2 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AMS comes with Goodman's standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the Goodman AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The Goodman AMS utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AMS air handler lives up to Goodman's comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.
OVERVIEW
The Goodman GLZ condenser is a standard efficiency, low-cost solution f. Just like all of Goodman's equipment, the GLZ is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the Goodman condenser efficiently transfers heat between the outdoor coil, providing cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
QUICK FACTS
Ideal size to cover a smaller house in ideal climates
2 ton, 14.3 SEER2 heat pump condenser
R32: Complies with Clean Air Act New Refrigerant Requirements
Low sound output
Fully charged for up to 15' of line set
Factory-installed bi-flow filter drier
2 Ton
The Goodman GLZ has a capacity of 2 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the GLZ heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The GLZ condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The Goodman GLZ condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The Goodman GLZS has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Disclaimer: This condenser contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R-32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-354-2738 if you have any questions.
2 Ton Multi-Positional Goodman Air Handler - R32
OVERVIEW
The Goodman AMS air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, Goodman upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
QUICK FACTS
2 ton air handler
Electric heat compatible
Optimized for use with R-32 refrigerant
Multi-speed, direct drive ECM blower motor
Multi-positional (upflow, downflow, or horizontal)
2 Tons
The Goodman AMS air handler is rated for an output of 2 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AMS comes with Goodman's standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the Goodman AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The Goodman AMS utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AMS air handler lives up to Goodman's comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.